1
Issue 01.2021
MPK Metall- und
Plastikverarbeitung GmbH & Co. KG
Friedrich-Ebert-Str. 298-300
D-58566 Kierspe
mpk-kierspe.de
Rooflight with pleated blind and net
for installation in caravans and mobile homes
VisionVent S pro
Technical data:
EN
Installation and Operating Instructions
Please read the instructions carefully before installing the rooflight
and store
it for future.
We cannot be held responsible for incorrect fitting, handling or operation.
Any product faults relating to the production and materials used should be notified to us via
an authorised dealer immediately.
Included with delivery
1x Rooflight with outer frame
1x Installation frame
1x Inner frame with double pleats
Additionally required for installation (not included in delivery)
1x Elastic sealant adhesive, e.g. Dekalin Dekaseal 8936 or SikaLastomer®-710
8x Fixing screws for the upper frame
Pan 3,5 mm / head according to DIN ISO 7049 (DIN 7981) /
The length of the screw should be determined by the roof thickness,
plus approximately 10 mm for the screw to enter the upper frame.
Explanation of symbols
Safety and installation instructions
Check the roof thickness of your vehicle before mounting.
The rooflight should only be fitted to a flat roof surface, both internally and
externally.
Choose a fitting position that will not interfere with other roof mounted components
(e.g. roof-racks/antenna's etc.) and avoid internally installed electrical cables and
furniture, which could impede the correct operation of the rooflight.
Never stand on the dome of the rooflight!
Do not open the rooflight while driving. The rooflight must be locked down before
traveling.
Do not open the rooflight in strong wind or rain .
Close the rooflight during rain and snowfall.
Extras (optional)
Designation
Article No
.
Adapter frame for Fiat Ducato
2828ARW
Aperture
280 x 280 mm
Roof thickness
24-46 bzw. 42-72 mm
Corner radius
18 mm
Site dome
380 x 395 mm
Height over roof
80 mm
Ventilation
75 cm²
Weight
1,7 kg
Size inner frame
340 x 365 x 32 mm
Outer frame material
Polypropylene
Dome material
PC + Polypropylene
Speed limit
130 km/h
Authorization
ECE R43 -019652
NOTE
Particulary important information.
ATTENTION!
Failure to observe can lead to material damage.
WARNING!
Safety note: Serious risk of injury.
