3
Issue 01.2021
Operation
To open the rooflight, both pleated blinds must be open.
Pull the operating bar down unlocking the mechanism. Now move the bar forwards (in
direction of travel) and the rooflight will open; all the time holding the bar down. As soon as
the operating bar is released it will lock into position and the dome will stay at this angle.
To close the rooflight, pull the operating bar down and push it back in the opposite direction.
When the end position is reached, the rooflight is locked automatically.
Keep the pleated blinds open while driving to avoid driving noise and damage
from the airstream.
To avoid heat accumulation do not close blind completely during the day. Open
both pleats when not using the vehicle.
Cleaning
For easier cleaning , the dome can be removed from the inner
frame by releasing the four plastic split pins.
Do not loosen any screws that are used to fasten the
dome or the opening mechanism.
Use only clear water and a soft sponge.
Solvents may attack the plastic and make it brittle.
After cleaning, maintain the sliding surfaces with a thin layer of Vaseline or WD40.
This makes the extension mechanism glide more easily. The rubber seals can be maintained
with talcum powder.
Pay attention that the pins positively click into the locked position when re-installing the dome.
The lever arm pins should be re-installed with the flat side towards the dome.
Clean the pleated blinds with a soft brush, dry cloth or feather duster.
We strongly advise against wet cleaning, as this can damage the insect screen and
blackout pleated blind.
Extras (optional)
Designation
Article No
.
Adapter frame for Fiat Ducato
4040ARW
Rubber seal without permanent ventilation
4801.11
Warranty
The legal warranty applies.
Disposal
Dispose of the appliance and packaging must be effected in accordance with the
corresponding local regulations and requirements for electrical appliances and
packaging.
mpk-kierspe.de/Downloads
