manualshive.com logo in svg

MPC TransPort U1100, Technical Reference Manual, Page: 74 / 111

Share
Download
MPC TransPort U1100 Technical Reference Manual Download Page 74

 

 
74

 

 

Preface

 

3.  The Notebook may auto detect your WebCam driver and enable 

the WebCam function. If there is no detection of your WebCam, 

you can manually enable the WebCam by going to 

Start Menu 

Control Panel 

Add Hardware 

to add the new device. 

Connecting the Printer 

If your printer has a USB interface, you can then use the USB port on the 

TransPort

®

 U1100 to connect a printer. Follow the instructions below to 

connect a printer: 

1.  Turn off the TransPort

®

 U1100. 

2.  Connect one end of the printer cable to the USB port and the 

other end to the printer. 

3.  Connect the power cord and turn on the printer. 

4.  Turn on the TransPort

®

 U1100 and the system will detect a new 

device. Install the required driver. 

For further instructions, please refer to your printer’s manual. 

Connecting the External Monitor or TV 

You can connect an external monitor to your Notebook through the VGA 

port for a larger view with higher resolution. To connect the monitor: 

1.  Make sure that the TransPort

®

 U1100 is turned off. 

2.  Plug the monitor’s D-type connector into the VGA port. 

3.  Connect the monitor’s power cord and turn on the monitor. 

Summary of Contents for TransPort U1100
















































































































Reviews:

No comments