MPC Computers 2005 © MAS001984-00
7
REMOVING BASE
Before attempting to remove the base, fully collapse the monitor and reinsert
the spring retention pin (1) in the pedestal. To remove the monitor base, gently
turn the monitor upside down and press the four retention clips together (3) to
release the base. Pull the base straight away from the monitor. (See Figure
1.)
Power Cord
Before connecting your monitor’s power cord, read the guidelines below:
•
This monitor has an integrated universal power supply. It can operate in
either a 100/120 VAC or 220/240 VAC voltage area. (No user adjustment
is required.)
•
Make sure the power cord meets the specifications and requirements for
your area. The power cord included with your monitor is rated for 100/120
VAC.
Caution: If the AC outlet is not grounded (with three holes), install the
proper grounding adapter (not supplied).
Plug the power cord (1) into the AC IN connection on the display and plug the
other end of the power cord into a three-pin AC power outlet or a UL-approved
power strip. (See Figure 2.)
Figure 2: Connecting Cables