Connectors and functional elements
1 MAIN LEVEL ADJUST
Preset of the main level of the system - subwoofer will be
adjusted too, corresponding the preset of the SUB LEVEL.
3 SUB LEVEL ADJUST
Preset subwoofer level proportionally to the satellite level.
5 LINE INPUT CINCH (LEFT / RIGHT)
Asymetrical RCA Line Input.
Please never use RCA and XLR
Input simultaneously!
6 LINE INPUT XLR (LEFT / RIGHT)
Symmetrical Line Input for XLR connectors.
Please never use
RCA and XLR Input simultaneously!
8 POWER SWITCH
ON / OFF switch. Please switch connected devices
to ON first and to OFF after switching the system.
9 POWER CONNECTION SEAT
Power connection seat 240 V (IEC power connector)
and fuse seat. Replacement of fuse only if power
connection is disconnected. If fuse blows repeatedly
please contact authorized personel for servicing.
7 SAT OUTPUT (LEFT / RIGHT)
®
Speakon compatible speaker output. Minimum impe-
dance speaker 4 ohms. Used pins are: 1+ / 1-.
2 SUB PHASE
Phase invertation switch to invert the Phase of the Sub-
woofer (0° / 180°) if necessary due to an difficult installtion.
If A 3120 is switched to ON and a connected device is
switched a resulting switch knack can be transfered to
the speakers with a high level. This can lead to a damage
of the connected speakers.
Konz Vertrieb: speaker trade
Neuenhofer Str. 42-44, 42657 Solingen, Germany, Tel: 0212 / 38226-0, Fax: 0212 / 38226-40 Internet: www.mivoc.com
Technical data MPA A 3120
Typ / type:
2.1 Aktivmodul
Size (WxHxD):
360 x 310 x 103 mm
Mounting dimensions (WxH):
330 x 280 mm
Mounting depth:
70 mm
Weight:
5 kg
Power output:
3 x 120 W R.M.S.
Frequency range:
45 - 130 Hz / 130 - 20000 Hz
Connectors:
Line In:
sym. XLR / asym. Cinch (RCA)
Input voltage range and impedance
0.3- 2.5 V, 10 kOhm
®
Sat Power Out
Speakon compatible / min. 4
Ù
Voltage / Power input:
220-240 V / 600 VA
1
2
3
5
6
7
8
9
75
330
2
8
0
Dimensions for mounting hole and separation chamber
2