8
Balancing
a)
Loosen the tilt knob, and adjust the
tilt arm back and forth until the lens
is horizontally forward, then lock the
knob.
b)
Rotate the camera until the lens is
facing up, loosen the L-Bracket quick release plate lock knob, and adjust the L-
Bracket quick release plate back and forth until the lens is straight up (leveled), then
lock the knob.
c)
Loosen the roll knob, adjust the roll
arm left and right until the roll arm
remains horizontal, then lock the
knob; The camera or phone should
be leveled and can be positioned in
any direction (up or down) and it
stays there.
d)
Hold the stabilizer horizontally and make the pan arm parallel to the ground, then
loosen the pan knob, adjust the pan arm left and right until the pan arm remains
horizontal, and then lock the knob. Your camera or phone should be leveled and can
be move to any direction (tilt, pan, roll) and stays on that position without hands
holding it.
Note: When adjusting the balance of an axis, please unlock the motor lock of
the axis first, otherwise it cannot be adjusted accurately; if the balance is not
adjusted accurately, it will cause the abnormal motor work, motor overheat,
unstable video, unavailable of certain functions, and also shorten battery life,
please make sure it is completely balanced before turning on the gimbal.
Connecting camera or mobile phone
a)
After installing the camera to the gimbal, you need to use the camera control cable
to connect camera with gimbal, and then you can control the gimbal through the
MOZA Master App
b)
After installing the mobile phone to the gimbal, please open the MOZA Genie App to
connect the gimbal, then you can control the phone to take photos or videos
through te gimbal.
Note: For camera functions and features, please use Moza
Master App. For Phone controls, please use Moza Genie App.