Moza iFocus M, User Manual, Page: 5 / 16

3
1. System Status Indicator
Functions of the MOZA iFocus M
LED indicators description:
Status LED
Power On Solid blue light
IFocus M connected to the gimbal and powered
on, ready for use.
Off
2. Power on and Power Supply
3. Connecting with the MOZA Stabilizer
（
e.g. Air 2
）
Connect the iFocus M with MOZA stabilizer ( such as MOZA Air2 )
via Multi-CAN cable.
Connect iFocus M to stabilizer (e.g. Air 2/AirCross 2) via Multi-Can cable to
power supply the motor. The iFocus M will automatically calibrate for first use or
after firmware upgrade. The calibration will last for 10 seconds with blue light
flashing during the process. Disconnect the iFocus M after the calibration, then
reconnect the iFocus M with stabilizer to use the motor.
Power Off
IFocus M disconnected to the gimbal and powered
off, unusable.
Sleep Mode Flashing blue light 1 time/1s
IFocus M is powered on, the motor was stuck for more
than five seconds or turned off through the gimbal.
Error Mode Flashing blue light 1 time/0.1s
IFcous M is powered on and not calibrated (wait 5s
with light flashing after connected to gimbal then
reconnect with gimbal after disconnected manually)
or Encoder Failure.
Upgrade Mode Solid blue light
Connect the Motor to the computer via the Type-C
cable to enter the firmware upgrade when it doesn't
connect with the gimbal.
Note: iFocus M can only support two stabilizers with Multi-CAN port:
MOZA Air 2 and AirCross 2. If you want to use iFocus M with other stabilizers,
you need to purchase additional power supply accessory for iFocus M and
MOZA Wireless Follow Focus Handunit