Moyer Diebel MDHHD Operation, Cleaning, And Maintenance Manual Download Page 6

Limited Warranty

Moyer Diebel Limited (herein referred to as Moyer Diebel, 2674 North 
Service Road, Jordan Station, Ontario, L0R 1S0 and 3765 Champion Blvd., 
Winston-Salem, NC 27105) warrants machines, and parts, as set out 
below.

WARRANTY OF MACHINES: 

Moyer Diebel warrants all new 

machines of its manufacture bearing the name Champion, Moyer 

Diebel and/or Nexus and installed within the United States and 

Canada to be free from defects in material and workman-ship for 

a period of one (1) year after the date of installation or fifteen (15) 

months after the date of shipment by Moyer Diebel, whichever 

occurs first. Products shipped outside of United States and Canada do 

not have warranty. The warranty registration card must be returned to 

Moyer Diebel within ten (10) days after installation. Warranty 

registration must be submitted to Moyer Diebel within ten (10) days 

after installation either online at: https://

www.championindustries.com/warranty-registration, or by fax on the 

form provided in the front of this manual if warranty card is not 

returned to Moyer Diebel within such period, the warranty will expire 

after one year from the date of shipment. Moyer Diebel will not 

assume any responsibility for extra costs for installation in any area 

where there are jurisdictional problems with local trades or unions. If 

a defect in workmanship or material is found to exist within the 

warranty period, Moyer Diebel, at its election, will either repair or 

replace the defective parts, machine or accept return of the machine 

for full credit. In the event that Moyer Diebel elects

to repair, the labour and work to be performed in connection with 

the warranty shall be done by a Moyer Diebel “Authorized Service 

Agent” during regular working hours and will covered at normal rates 

and any additional overtime rate will be at the responsibility of the 

equipment purchaser. Warranty is covered up to 50 miles or 80 km’s 

of travel from a Moyer Diebel authorized service technician.  If travel 

exceeds 50 miles or 80 km’s, then the end user will be responsible for 

additional travel expense. Service calls initiated under warranty that 

are found to not contain any defects in materials or workmanship, will 

not be covered by Moyer Diebel. Defective parts become the 

property of Moyer Diebel. Use of non OEM replacement parts not 

authorized by Moyer Diebel will relieve Moyer Diebel of all liability in 

connection with its warranty. In no event will Moyer Diebel’s warranty 

obligation exceed Moyer Diebel’s charge for the machine. Models 

that come with a factory paid start-up will be limited to one visit. 

Machines found to have issues related to installation procedures, or 

delays of any kind, will not be covered by Moyer Diebel and the sole 

responsibility of the equipment purchaser.

The following are not covered by Moyer Diebel’s warranty:

a. Element tubes and/or squeeze tubes.
b. Vacuum breakers.
c. Replacement of fuses or resetting of overload breakers, or high

limits.
d. Adjustment of thermostats, or temperature controlling devices.
e. Adjustment of clutches.
f. Adjustments of water pressure(s).

g. Adjustments of chemical pumps.
h. Opening or closing of utility supply valves or switching of electrical

supply current.
i. Cleaning of valves, strainers, screens, nozzles, or spray pipes.
j. Performance of regular maintenance and cleaning as outlined in

operator’s guide.
k. Damages resulting from water conditions, accidents, alterations,

improper use, abuse, tampering, improper installation, low voltage

conditions, inadequate wiring, outdoor use, or failure to follow

maintenance and operation procedures.
l. Wear on Pulper cutter blocks, pulse vanes, and auger brush.
m. Damages due to improper storage.
n. Special installations or applications, including remote locations, are

limited in coverage by this warranty.  Any installation that requires

extra work, and/or travel, to gain access to the unit for service is the

sole responsibility of the equipment purchaser.

Examples of the defects not covered by warranty include, but are 

not limited to:

1. Damage to the exterior or interior finish as a result of the above.
2. Use with utility service other than that designated on the rating

plate.
3. Improper connection to utility service.
4. Inadequate or excessive water pressure.
5. Corrosion from foreign materials, water supplies, improper

chemicals, or chemicals dispensed in excess of recommended

concentrations.
6. Failure of electrical components due to connection of chemical

dispensing equipment installed by others.
7. Leaks or damage resulting from such leaks caused by water

quality, or the installer, including  machine table connections or by

connection of chemical dispensing equipment installed by others.
8. Failure to comply with all local building codes.
9. Damage caused by labor dispute.

WARRANTY OF PARTS:

 Moyer Diebel warrants all new machine 

parts produced or authorized by Moyer Diebel to be free from 

defects in material and workmanship for a period of 90 days from 

date of invoice. If any defect in material and workmanship is found 

to exist within the warranty period, Moyer Diebel will replace the 

defective part without charge.

DISCLAIMER OF WARRANTIES AND LIMITATIONS OF LIABILITY. MOYER DIEBEL’S 
WARRANTY IS ONLY TO THE EXTENT REFLECTED ABOVE. MOYER DIEBEL 
MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT 
LIMITED TO, ANY WARRANTY OF MERCHANTABILITY, OR FITNESS OF PURPOSE. 
MOYER DIEBEL SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL 
DAMAGES. THE REMEDIES SET OUT ABOVE ARE THE EXCLUSIVE REMEDIES FOR 
ANY DEFECTS FOUND TO EXIST IN MOYER DIEBEL DISHWASHING MACHINES 
AND MOYER DIEBEL PARTS, AND ALL OTHER REMEDIES ARE EXCLUDED, 
INCLUDING ANY LIABILITY FOR INCIDENTALS OR CONSEQUENTIAL DAMAGES.

Moyer Diebel does not authorize any other person, including persons who 

deal in Moyer Diebel dishwashing machines, to change this warranty 

or create any other obligation in connection with Moyer Diebel Limited 

dishwashing machines.

Limited Warranty

ii

Summary of Contents for MDHHD





























Reviews: