Moyer Diebel 201HT, Installation Manual With Service Replacement Parts

Page: 9 / 68

3
Electrical Connection
Front Panel Screw Location
______________ Installation Guide
Electrical Connection
NOTE: The electrical connection must be performed by a qualified electrician in accordance
with local codes and the National Electrical Code.
WARNING:
For models 201HT, 401HT, 501HT disconnect the incoming supply at the main
disconnect switch. Lockout and tag the switch to indicate that work
is being done on the circuit.
1. Refer to the connection diagrams below for proper dishwasher power connection at
the dishwasher main terminal block (MTB).
2. The single phase electrical supply must be a
3-wire plus ground circuit which includes
a current carrying neutral.
3. The 3-phase power connection is a 4-wire
plus ground which includes
a current carrying neutral.
4. The dishwasher MTB is located at the
front right-side of dishwasher. dishwasher’s
lower front access panel by removing the
two truss head screws.