Moxy Moxy5, Owner'S Manual, Page: 7 / 20

6
Moxy Sensor Settings
The sensor settings can be adjusted using the Moxy Sensor Settings App.
This app can be run on Windows, Android, and Mac devices. At this point,
it does not run on iOS devices. You can access the App at
www.moxymonitor.com\settings-app
You MUST access the Sensor Setting App using the browser indicated on
the web page for your device’s platform to connect to the sensor via
Bluetooth.
If the sensor is set in ANT+ broadcast mode, it will still advertise in
Bluetooth mode for the first 10 seconds that it is turned on. You must
connect to the Settings App during this 10 second window. If you miss the
window, turn the sensor off and back on to try again.
Settings and Features
Time: This allows the stored data time stamps to be set correctly. A hard
reset or a completely dead battery on the sensor will cause it to lose its
time setting.
Broadcast Mode: The primary broadcast modes are ANT+ MO2 Profile and
Bluetooth.
Update Rate: The Moxy sensor has 4 update rate modes
•
Default: Updates every 2 seconds with 10 second Smoothing
•
No Smooth: Updates every 2 seconds with No Smoothing
•
Low Power: Same as Default except fewer LED cycles are used to
save power
•
High Speed: Updates every 0.5 seconds with No Smoothing