UC-8580 Series Hardware User Manual
18
3.
Attach the flat end of the antenna cable to the connector marked
MAIN
on the module and insert the
other end of the cable with the connector tube into the antenna hole marked
MAIN
on the front panel
of the computer.
You must first remove the black cover on the antenna hole and insert the connector tube through the
back side of the front panel before you can attach the antenna cable.
Follow the procedure described above to attach the AUX antenna cable.
4.
Use the black tape provided in the package to secure the antenna cables to the module.
Attach tags (also provided in the package) to the cables to help identify them easily as shown in the
picture below:
5.
Insert the antenna connectors through the D-shaped antenna holes on the front panel. Be sure to align
the D shaped connector tube with the antenna hole before you do so.
Secure the antenna connectors to the front panel by inserting the locking washers through the
connector tube followed by the nut and then tightening the nut onto the threaded protection ring.
