- 4 -
Installing the UC-8100
There are two sliders on the back of the unit for DIN-rail and wall
mounting.
Mounting on a DIN Rail
Pull out the bottom slider, latch the unit onto the DIN rail, and push the
slider back in.
Mounting on a Wall
Pull out both the top and bottom
sliders, align the screws with the
mounting holes, and secure the
device to the wall by driving the
screws into the wall.
Another method for wall mounting installation is to use the optional wall
mounting kit. Attach two mounting brackets on the side panel of the
computer, and fasten with screws. Install the computer on to a wall or
cabinet by fastening two screws for each mounting bracket.
Connector Description
Power Connector
Connect the “terminal block to power jack converter” (included in the
package) to the UC-8100’s DC terminal block (located on the top panel),
and then connect the power adapter. It takes about 30 seconds for the
system to boot up. Once the system is ready, the
Power
LED will light up.