UC-8100-LX Software
Getting Started
2-4
UC-8100-LX. To connect through serial console, you need terminal software installed on your PC. Set the
following serial connection parameters on your PC terminal software.
Serial Console Port Settings
Baud rate
115200 bps
Parity
None
Data bits
8
Stop bits:
1
Flow Control
None
Terminal
VT100
Below we will show how to use the terminal software to connect to the UC-8100-LX Series in Linux environment
and in Windows environment.
Linux Users
NOTE
These steps are done on the Linux PC from which you want to connect to UC-8100-LX, NOT to be done on the
UC-8100-LX
For Linux users, you may follow these steps to connect to UC-8100-LX Series from your personal computer.
1.
Install
minicom
from the package repository of your operating system.
For Centos and Fedora:
user@PC1:~# yum -y install minicom
For Ubuntu and Debian:
user@PC2:~# apt-get install minicom
2.
Use
minicom –s
command to enter configuration menu and setup the serial port settings.
user@PC1:~# minicom –s
3.
Select
Serial port setup
.
4.
Select
A
to change the serial device. Note that you need to know which device node is connected to the
UC-8100-LX.
5.
Select
E
to configure the port settings according to the
Serial Console Port Settings
table provided.
6.
Select
Save setup as dfl
(from the main configuration menu) to save as default value.