manualshive.com logo in svg

Moxa Technologies UC-7410, User Manual

Share
Download
Moxa Technologies UC-7410 User Manual Download Page 66

UC-7420/7410 User’s Manual 

Managing Communication

 

 

4-14

Setting up a Machine for Incoming PPP Connections 

This first example applies to using a modem, and requiring authorization with a username and 
password. 

pppd/dev/ttyM0 115200 crtscts modem 192.168.16.1:192.168.16.2 login auth

 

You should also add the following line to the file 

/etc/ppp/pap-secrets

: 

*    *    “”    *

 

The first star (*) lets everyone login. The second star (*) lets every host connect. The pair of 
double quotation marks (“”) is to use the file 

/etc/passwd

 to check the password. The last star (*) 

is to let any IP connect. 

The following example does not check the username and password: 

pppd/dev/ttyM0 115200 crtscts modem 192.168.16.1:192.168.16.2

 

NFS (Network File System) 

The Network File System (NFS) is used to mount a disk partition on a remote machine, as if it 
were on a local hard drive, allowing fast, seamless sharing of files across a network. NFS allows 
users to develop applications for UC-7420/7410, without worrying about the amount of disk space 
that will be available. UC-7420/7410 supports NFS protocol for both client and server. 

NOTE 

Click on the following links for more information about NFS: 

http://www.tldp.org/HOWTO/NFS-HOWTO/index.html

 

http://nfs.sourceforge.net/nfs-howto/client.html

 

http://nfs.sourceforge.net/nfs-howto/server.html

 

 

Setting up UC-7420/7410 as an NFS Server 

By default, UC-7420/7410 enables the service 

/etc/init.d/nfs-user-server

. The service link file 

S25nfs-user-server

 is located in the directory 

/rc.d/rc2.d-rc5.d

. 

Edit the NFS server configuration file 

/etc/exports

 to set up the remote host (NTF client) list and 

access rights for a specific directory. The file formats are shown below: 

#vi /etc/exports 

File Format: 

directory machine1(option11,option12) machine2(option21,option22) 

directory 

The directory that will be shared with the NFS Client. 

machine1 and machine2 

Client machines that will have access to the directory. A machine can be listed by its DNS 
address or IP address (e.g., machine.company.com or 192.168.0.8). 

optionxx 

The option list for a machine describes the kind of access the machine will have. Important 
options are: 

ro 

Read only. This is the default. 

rw 

Readable and Writeable. 

Summary of Contents for UC-7410











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands