—
6
—
8.
PWR1 LED: for power input 1.
9.
PWR2 LED: for power input 2.
10. FAULT
LED.
11. MSTR/HEAD LED: for ring master or chain head.
12. CPLR/TAIL LED: for ring coupler or chain tail.
13. TP port’s 10/100 Mbps LED.
14. 10/100BaseT(X) port (female 4-pin shielded M12 connector with D
coding).
15. Waterproof
vent.
16. Product
label.
17. 12 Screw holes for DIN-Rail mounting kit.
18. E1 LED: Down-side E1 Gigabit port's 10/100/1000 Mbps LED.
19. E2: LED: Down-side E2 Gigabit port's 10/100/1000 Mbps LED.
20. Gigabit Ethernet port E1 (corresponding to port 17 in the TN-5510
User's Manual).
21. Gigabit Ethernet port E2 (corresponding to port 18 in the TN-5510
User's Manual).
ATTENTION
Please DO NOT open or remove vent
15
. The warranty will be
invalid if the seal is removed.
All exposed connectors, including
3
,
5
,
7,
and
14
, should be
tightly covered by protective caps when they are not in use to
ensure for IP54/IP67 protection.
After setting rotary switch
1
, the protective cover must be fixed
properly to ensure IP54/IP67 protection.
