2
2
Chapter 2
Getting Started
In this chapter, we explain how to use a PC to operate a DA-660 computer. For clarity, the PC is
referred to as a development workstation and the DA-660 computer is called a target computer.
In addition, manual steps are described to facilitate operations such as system time adjustment,
troubleshooting network connectivity, etc. Some of these operations can be done via system
commands after gaining access to the computer and others can be done by a Web-based
management system, which is described in a later chapter.
The following topics are covered in this chapter:
Resetting Your DA-660 Computer
Operating Your DA-660 Computer Via Serial Console
¾
Operating Your DA-660 Computer Via Telnet Client
Adjusting System Time and RTC Time
Starting and Stopping Services
Troubleshooting Network Connectivity
Simple Network Management Protocol (SNMP)
