OnCell G3470A-LTE
Software Installation and Configuration
4-5
6.
Click
Install
to begin the installation. The setup window will report the progress of the installation. To
change the installation settings, click
Back
and navigate to the previous screen.
7.
Click
Finish
to complete the installation of the Wireless Search Utility.
Configuring the Wireless Search Utility
The Broadcast Search function is used to locate all OnCell G3470A-LTE APs that are connected to the same
LAN as your computer. After locating an OnCell G3470A-LTE, you will be able to change its IP address. Since
the Broadcast Search function searches by TCP packet and not IP address.
1.
Start the
Wireless Search Utility
program.
If this is the first time you start the program, you are prompted to set the password (must be longer
than four characters).
2.
In the Wireless Search Utility screen, choose one of the following options and click OK.
•
Device search only
–Search for OnCell G3470A-LTE units and to view each OnCell G3470A-LTE’s
configuration.
•
Device management
–Assign IP addresses, upgrade firmware, and locate devices.
