OnCell G3100 Series
Software Installation/Configuration
14-6
Alternatively, for Real COM mode, you can select
Input Manually
and then manually enter the OnCell
G3100’s IP Type. To do this, select LAN type, followed by
1st Data Port
, and
1st Command Port
for the
COM ports that will be mapped to. Click
OK
to proceed to the next step. Note that the
Add OnCell
page
supports FQDN (Fully Qualified Domain Name), in which case the IP address will be filled in automatically.
If you select “WAN IP or Host name,” you must configure the
1st Data Port
,
1st Command Port
, and
Total Ports
for the COM ports that will be mapped to. Click
OK
to proceed to the next step. Note that the
Add OnCell
page supports FQDN (Fully Qualified Domain Name), in which case the IP address will be filled
in automatically.
