OnCell G2111/G2151I Series
AT Command Set
3-8
2.
Modify the terminal settings to match the new serial communication parameters.
3.
Type
AT&W
and press
Enter
to save the settings.
Flow Control
The default RTS/CTS and XON/XOFF flow control setting is none. To enable RTS/CTS flow control:
1.
Type AT/Q=3 and press
Enter
. To disable flow control again, type AT+ICF=0 and press
Enter
.
2.
Type AT&W and press
Enter
to save the settings.
3.
To enable XON/XOFF flow control:
Type AT/Q=1 and press
Enter
. To disable flow control again, type AT+ICF=0 and press
Enter
.
www.ipc2u.ru
www.moxa.pro
