— 4 —
— 5 —
— 6 —
5. Software Installation Information
To install the COM driver, first insert the Document & Software CD
into your computer’s CD-ROM drive. When the installation window
opens, click on the
Install COM Driver
button, and then follow the
on-screen instructions.
To see detailed information about NPort W2004, click on the
Documents
button, and then select “NPort W2004 User’s Manual” to
open the pdf version of the manual.
An NPort Search Utility is also included on the Documentation &
Software CD. The NPort Search Utility is used to search for NPort
W2004 units on the network. To install the utility, first insert the
Documentation & Software CD into your computer’s CD-ROM drive.
When the installation window opens, click on the
Install UTILITY
button, and then follow the on-screen instructions.
6. Initializing W2004’s IP Address
Factory Default IP Addresses
LAN:
Static; IP/netmask = 192.168.126.254/255.255.255.0
WLAN Static; IP/netmask = 192.168.127.254/255.255.255.0
(If the LAN or WLAN is configured for DHCP, but the DHCP server
cannot be found, the IP addresses will revert to the above default
values.)
NOTE
If you forget the IP address, you can use the NPort Search
utility (from your PC) to locate the NPort W2004 unit over
the network. You will be able to view the IP address on the
screen.
NOTE
Only one of the two network interfaces can be active at any
given time. If the NPort is powered on and the Ethernet port
is connected to a live network or device, then the Ethernet
link will be active, and the WLAN will be inactive. If the
Ethernet port is NOT connected to a live network, the WLAN
will be active, and the Ethernet link will be inactive.
Web Console
Follow these steps to access NPort W2004’s web console.
STEP 1: Use a cross-over cable to connect the NPort’s LAN port to
your PC, and then open your web browser.
STEP 2: Type 192.168.126.254 (the default LAN IP) in the browser’s
address input box.
STEP 3: The NPort W2004 homepage will open. The current
configuration settings will be displayed.
STEP 4: For first time users, click on the
Wizard
, and then configure
the IP address, SSID, WEP mode, WEP key index, and WEP
key. For other selection items, you can use the default
settings, or change the settings to match your specific
environment.
7. Serial Port Pin Assignments (8-pin RJ45)
8. Cable Wiring Diagrams
In this section, we show the wiring diagrams for the four optional
cables. These cables are used most often for RS-232 applications.
CBL-RJ45F9-150
(8-pin RJ45 to Female DB9)
CBL-RJ45M9-150
(8-pin RJ45 to Male DB9)
9. Specifications
WLAN
Standard Compliance:
802.11g/b
Radio Frequency Type:
DSSS, OFDM
Tx Power 11b:
18 dBm + 2 dBi
Tx Power 11g:
16 dBm + 2 dBi
Rx Sensitivity:
-70 dBm @ 54 Mbps, -85 dBm @ 11 Mbps
Transmission rate:
54 Mbps (max.) with auto fallback (54, 48,
36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbps)
Transmission distance:
Up to 300 meters (@ 12 Mbps, in open areas)
Security:
WEP 64-bit/128-bit data encryption
Antenna connector:
Reverse SMA
Network Modes:
Infrastructure, Ad-Hoc
LAN
Ethernet:
10/100 Mbps, RJ45
Protection:
Built-in 1.5 KV magnetic isolation
Serial
No. of ports:
4
Interface:
RS-232/422/485 (8-pin RJ45); 15 KV ESD
for all signals
RS-485 data direction
ADDC™ (patented Automatic Data Direction
Control)
Serial Communication Parameters
Parity:
None, Even, Odd, Space, Mark
Data bits:
5, 6, 7, 8
Stop bits:
1, 1.5, 2
Flow control:
RTS/CTS, XON/XOFF
Speed:
50 bps to 460.8 Kbps
Environmental
Operating temperature:
0 to 60°C (32 to 140°F) at 5 to 95% RH
Storage temperature:
-20 to 85°C (-4 to 185°F) at 5 to 95% RH
Regulatory Approvals
EMC:
FCC Class A, CE Class A
Safety:
UL, CUL, TÜV
Click here for online support:
The Americas: +1-714-528-6777 (toll-free: 1-888-669-2872)
Europe: +49-89-3 70 03 99-0
Asia-Pacific: +886-2-8919-1230
China: +86-21-5258-9955 (toll-free: 800-820-5036)
2008 Moxa Inc., all rights reserved.
Reproduction without permission is prohibited.
