NPort 5100 Series User’s Manual
Web Console Configuration
5-2
Opening Your Browser
1.
Open your browser with the cookie function enabled. (To enable your browser for cookies,
right click on your desktop Internet Explorer icon, select Properties, click on the Security tab,
and then select the three Enable options as shown in the figure below.)
2.
Type
192.168.127.254
in the
Address
input box (use the correct IP address if different from
the default), and then press
Enter
.
3.
Input the password if prompted. The password will be transmitted with MD5 encryption over
the Ethernet. Note that you will not be prompted to enter the password if the NPort 5100 is not
currently password protected.
ATTENTION
If you use other web browsers, remember to Enable the functions to “allow cookies that are
stored on your computer” or “allow per-session cookies.”
NPort 5100 uses cookies only for “password” transmission.
ATTENTION
Refer to Chapter 3,
Initial IP Address Configuration
, to see how to configure the IP address.
Examples shown in this chapter use the Factory Default IP address (192.168.127.254).
Summary of Contents for NPort 5100 Series
Page 1: ......
