Moxa Technologies MGate MB3000 Modbus, User Manual, Page: 17 / 89

MGate MB3000 Modbus Gateway User Manual 17
DIN-Rail and Wall Mounting
Mounting on a DIN-rail: Attach the DIN-rail accessories and latch the unit onto the DIN-rail as shown.
The DIN-rail kit is ordered separately.
Mounting on the wall: Place two screws in the wall and slide the unit onto the
screws as shown. The head of the screws should be 5 to 7 mm in diameter, the
shaft should be 3 to 4 mm in diameter, and the length of the screws should be at
least 10.5 mm. Make sure to leave about 2 mm of space between the head and the
wall.
Specifications
LAN
Ethernet 10/100 Mbps, RJ45, Auto MDI/MDIX
Protection Built-in 1.5 kV magnetic isolation
Serial Interface
Interface RS-232/422/485
No. of Ports 2 ports
Connector Type DB9 (male)
Signals RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485 (2-wire): Data+, Data-, GND
RS-485 (4-wire): Tx+, Tx-, Rx+, Rx-, GND
Serial Line Protection 15 kV ESD for all signals
RS-485 Data Direction Patented ADDC™
Serial Communication Parameters
Parity None, Even, Odd, Space, Mark
Data Bits 7, 8
Stop Bits 1, 2
Flow Control RTS/CTS
Transmission Speed 50 bps to 921.6 Kbps
Software Features
Operation Mode RTU Slave, RTU Master, ASCII Slave, ASCII Master
Utilities MGate Manager
Multi-Masters and Multi-
Request 16 simultaneous TCP masters, 32 simultaneous requests for each TCP master