- 4 -
Hardware Installation Procedure
STEP 1:
Use a standard straight-through Ethernet cable to connect
the unit to a network hub or switch.
STEP 2:
Connect your device to the unit’s serial port.
STEP 3:
Mount the unit on a DIN-rail.
STEP 4:
Connect the power source to power input.
Wall or Cabinet Mounting
Mounting the MGate EIP3170/3270 on to a wall
requires two screws. The heads of the screws
should be 5 to 7 mm in diameter, the shafts
should be 3 to 4 mm in diameter, and the length
of the screws should be more than 10.5 mm.
NOTE
Wall mounting is certified for use in maritime applications.
Wallmount
DIN Rail
Software Installation Information
You can download the MGate Manager, User's Manual, and Device
Search Utility (DSU) from Moxa's website:
. Please refer
to the User’s Manual for additional details on using the MGate Manager
and DSU.
Default IP address:
192.168.127.254
Pin Assignments
Ethernet Port (RJ45)
Pin
Signal
1
Tx+
2
Tx-
3
Rx+
6
Rx-