Moxa Tech Note
Connecting the ioLogik 2000 to a SolarWinds NPM
Copyright © 2016 Moxa Inc.
Page 2 of 11
There are two sections in this document. The first section introduces how to connect the ioLogik
2000 to the SolarWinds NPM via the SNMP protocol, and second section introduces how to set up
the SolarWinds NPM to receive SNMP traps from the ioLogik 2000 series.
1
How to connect the ioLogik 2000 series to a SolarWinds
NPM via the SNMP protocol
1.
After installing the SolarWinds NPM, open the Orion Web Console and log in to your account
(you may also log in as admin without using a password).
2.
After logging in, use the step-by-step wizard to complete the settings.
Note:
Make sure that the ioLogik 2000 series IP addresses are in the correct IP range.
