Moxa Technologies IMC-P101 Series, Quick Installation Manual

Page: 11 / 12

- 11 -
LED Color State Description
PSE
Indicator
Green
ON PSE is enabled.
1 Flash Low Signature Resistance
2 Flash High Signature Resistance
5 Flash Power overload Fault
9 Flash
Power Management Allocation
Exceeded
10M Yellow
ON Ethernet port 10 Mbps link is active.
Blinking Data is being transmitted at 10 Mbps.
OFF Ethernet port 10 Mbps link is inactive.
100M Green
ON Ethernet port 100 Mbps link is active.
Blinking Data is being transmitted at 100 Mbps.
OFF Ethernet port 100 Mbps link is inactive.
Specifications
Technology
Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X), 100BaseFX
IEEE 802.3af for Power-over-Ethernet
Interface
RJ45 ports 10/100BaseT(X)
Fiber ports 100BaseFX (SC, ST connectors available)
LED Indicators PWR1, PWR2, Fiber Link/Act, 10/100M
(Ethernet port), PSE Indicator
DIP Switches:
Dip No. Function ON OFF
1 Auto Negotiation Enable* Disable
2 Force TP Speed 100Mbps* 10Mbps
3 Force TP Duplex Full Duplex* Half Duplex
4
Link Fault Pass
Through
Enable* Disable
5 Operating Mode Store-and-Forward* Pass Through
6 PSE Disable Enable*
7
P.R.R.
(PD Remote Reset)
Enable Disable*
(*): Default DIP switch setting.
Alarm Contact One relay output with current carrying
capacity of 1A @ 24 VDC
Optical Fiber:
100BaseFX
Multi-mode Single-mode
Wavelength 1300 nm 1310 nm
Max. TX -10 dBm 0 dBm
Min. TX -20 dBm -5 dBm
RX Sensitivity -32 dBm -34 dBm
Link Budget 12 dB 29 dB
Typical Distance
5 km
a
4 km b
40 km
c
Saturation -6 dBm -3 dBm
a. 50/125 μm, 800 MHz*km fiber optic cable
b. 62.5/125 μm, 500 MHz*km fiber optic cable
c. 9/125 μm, 3.5 PS/(nm*km) fiber optic cable