Moxa Technologies EtherDevice EDS-728 Series Hardware Installation Manual Download Page 13

Page: 13 / 16

Digital Inputs

Two inputs with the same ground, but electrically
isolated from the electronics.

For state “1”: +13 to +30V

For state “0”: -30 to +3V

Max. input current: 8 mA

Power

Input Voltage

24 VDC (12 to 45 VDC), redundant dual inputs

Connection

Two removable 6-pin terminal blocks

Power Consumption

EDS-72810G/82810G 22.9W
IM-4TX   2.5W
IM-2MSC/2TX   5W
IM-2MST/2TX   5W
IM-2SSC/2TX 5W
IM-4MSC

7.2W

IM-4MST

7.2W

IM-4SSC

7.2W

IM-1LSC/3TX 4W
IM-2GTX

IM-2GSFP

Overload Current
Protection

Present

Reverse Polarity
Protection

Present

Mechanical

Casing IP30

protection

Dimensions

362

146

128 mm (W

Weight 1850g
Installation DIN-Rail,

Wall Mounting (optional kit)

Gigabit Ethernet Interface Module, IM-2G Series

IM-2GTX:

Interface Module with 2 10/100/1000BaseT(X) ports, RJ45
connectors.

IM-2GSFP:

Interface Module with 2 1000BaseSX/LX/LHX/ZX SFP
sockets for SFP modules.

1M-2 GTX

P2
P1

1M-2 GSFP

IM-2GTX IM-2GSFP

Interface

LED Indicators

P1, P2 for Port Status

RJ45 Ports

10/100/1000BaseT(X) auto negotiation speed, and
auto MDI/MDI-X connection

Distance 100

Fiber Ports

1000BaseSX/LX/LHX/ZX (SFP socket)

Summary of Contents for EtherDevice EDS-728 Series

















Search results

Summary of Contents for EtherDevice EDS-728 Series

Reviews:

Related manuals for EtherDevice EDS-728 Series

Brands by name

Popular brands

Moxa Technologies EtherDevice EDS-728 Series, Hardware Installation Manual

Search results

Summary of Contents for EtherDevice EDS-728 Series

Reviews:

Related manuals for EtherDevice EDS-728 Series

Brands by name

Popular brands