- 5 -
DIN-Rail Mounting
The metal DIN-rail kit is fixed to the back panel of the EDS-G512E-8PoE
series when you take it out of the box. Mount the EDS-G512E-8PoE series
on corrosion-free mounting rails that meet the EN 60715 standard.
Installation
STEP 1—
Insert the upper lip
of the DIN rail into the DIN-rail
mounting kit.
STEP 2—
Press the
EDS-G512E-8PoE series
towards the DIN rail until it
snaps into place.
Removal
STEP 1
—Pull down the latch
on the mounting kit with a
screwdriver.
STEP 2 & 3
—Slightly pull the
EDS-G512E-8PoE series
forward and lift up to remove
it from the DIN rail.
Wall Mounting (Optional)
For some applications, you will find it convenient to mount Moxa EDS-
G500E series on the wall, as shown in the following illustrations:
STEP 1—
Remove the
aluminum DIN rail
attachment plate from the
rear panel of the
EDS-G512E-8PoE series,
and then attach the wall
mount plates with M3
screws, as shown in the
figure at the right.
www.ipc2u.ru
www.moxa.pro
