– 1 –
– 2 –
– 3 –
P/N: 1802026000021
CN2600 Series
Quick Installation Guide
Second Edition, November 2010
1.
Overview
The Moxa CN2600 dual-LAN terminal servers have 8 or 16 RS-232
or RS-232/422/485 ports and dual 10/100 Mbps Ethernet LAN
ports, and some models come with dual AC power inputs. The
CN2600 terminal servers are used to connect terminals, modems,
printers, and other serial devices to LAN hosts, and all models
comply with TCP/IP and IEEE802.3 specifications using standard
twisted pair 10/100BaseTX cable as the transmission medium.
2.
CN2600 series Models
Model Name
Description
CN2610-8
8 RS-232 ports with RJ45 connectors,
100-240 VAC input.
CN2610-8-2AC 8 RS-232 ports with RJ45 connectors,
2 100-240 VAC input.
CN2610-16
16 RS-232 ports with RJ45 connectors,
100-240 VAC power input
CN2610-16-2AC 16 RS-232 ports with RJ45 connectors,
2 100-240 VAC power input
CN2650-8
8 RS-232/422/485 ports with RJ45 connectors,
100-240 VAC power inputs
CN2650-8-2AC-
T
Dual-LAN, dual-AC-power terminal server with 8
RS-232/422/485 ports, -40 to 75°C operating
temperature
CN2650-8-2AC 8 RS-232/422/485 ports with RJ45 connectors,
100-240 VAC power inputs
CN2650-16
16 RS-232/422/485 ports with RJ45 connectors,
100-240 VAC power inputs
CN2650-16-2AC
-T
Dual-LAN, dual-AC-power terminal server with
16 RS-232/422/485 ports, -40 to 75°C operating
temperature
CN2650-16-2AC 16 RS-232/422/485 ports with RJ45 connectors,
2 100-240 VAC power inputs
CN2650I-8
8 RS-232/422/485 ports with DB9-M connectors
and 2 KV isolation protection, 100-240 VAC
power input
CN2650I-8-2AC 8 RS-232/422/485 ports with DB9-M connectors
and 2 KV isolation protection, 2 100-240 VAC
power input
CN2650I-16
16 RS-232/422/485 ports with DB9-M
connectors and 2 KV isolation protection,
100-240 VAC power inputs
CN2650I-16-2AC 16 RS-232/422/485 ports with DB9-M
connectors and 2 KV isolation protection, 2
100-240 VAC power inputs
3.
Package Checklist
The CN2600 dual-LAN terminal server products are shipped with
the following items:
•
1 CN2600 series Terminal Server
•
Power cord (AC models only)*
•
Document and & Software CD-ROM
•
Quick Installation Guide (this guide)
•
1 DB9 serial cable (CBL-RJ45F9-150)
•
1 DB25 serial cable (CBL-RJ45M25-150)
* Power cords are available with US, Euro, UK, and JP plugs.
Optional Accessories
•
CBL-RJ45M9-150: RJ45 (8-pin) to DB9 (male) cable, 150 cm
•
CBL-RJ45F9-150: RJ45 (8-pin) to DB25 (female) cable, 150
cm
•
CBL-RJ45M25-150: RJ45 (8-pin) to DB25 (male) cable, 150
cm
•
CBL-RJ45F25-150: RJ45 (8-pin) to DB25 (female) cable, 150
cm
NOTE Notify your sales representative if any of the above items
are missing or damaged.
4.
Hardware Introduction
NOTE The wide temperature model does not support the LCM
Display panel or push buttons. The LCM description below
applies only to standard temperature models.
Front Panel
LED
Color Description
Reset
None
Press the Reset button for 5 seconds to load
factory defaults. The CN2600 will beep twice
when the configuration has been reset.
Ready
Red
Used for configuring the IP address and other
parameters.
Green Lights up when the CN2600 system is ready.
Serial Tx Green Flashes to indicate serial port transmission.
Serial Rx Yellow Flashes to indicate serial port reception.
Rear Panel
Connector
Function
AC Power
Input
Automatic detection of 100-240V, 47-63 Hz AC
power supply.
Power On/Off
Switch
I indicates power on; O indicates power off.
RS-232
Console Port
One RJ45 connector for console terminal
connection.
LAN1
Auto detecting 10/100 Mbps port.
LAN2
Auto detecting 10/100 Mbps port.
Serial Ports
8 or 16 RJ45 or DB9 connectors for DCE (modem)
connections.
LCM Display
We recommend using the LCM display and four push buttons to
configure the IP address for the first time.
Basic Operation
If the CN2600 is working properly, the LCM panel will display a
green color. The red Ready LED will also light up, indicating that
the CN2600 is receiving power. After the red Ready LED turns to
green, you will see a display similar to the following: (Example)
C N 2 6 1 0 -
1 6 _ 3
1 9 2 .
1 6 8 .
1 2 7 .
2 5 4
CN2610-16:
The CN2610’s name
03:
The CN2610’s serial number
192.168.127.254: The CN2610’s IP address
There are four push buttons on the CN2600 nameplate. Going from
left to right, the buttons are:
Button Name
Action
MENU
menu
Activates the main menu, or returns to an
upper level.
up
cursor
Scrolls up through a list of items shown on the
LCM panel’s second line.
