- 17 -
ATTENTION
Do not locate the antenna near overhead power lines or other
electric light or power circuits, or where it can come into contact
with such circuits. When installing the antenna, take extreme
care not to come into contact with such circuits, because they
may cause serious injury or death when there is a surge. For
instructions on proper installation and grounding of the antenna,
refer to national and local codes (for example, U.S.: NFPA 70;
National Electrical Code, Article 810; Canada: Canadian Electrical
Code, Section 54).
NOTE
For installation flexibility, either the A antenna or the B antenna
may be selected for use. Make sure the antenna connection
matches the antenna configured in the AWK-4131 web interface.
To protect the connectors and RF module, all radio ports should
be terminated by either an antenna or a terminator. We strongly
recommend using resistive terminators for terminating the
unused antenna ports.
ATTENTION
An IP68-rated field installable plug, which is available in the AWK-
4000 and AWK-6000 series' accessory pack, may be needed to
ensure IP68 connectivity. For details, refer to the product
installation guide.