MOXA AirWorks AWK-1200-AC User’s Manual
Web Console Configuration
3-2
BASIC
LAN
These are the IP address settings of the LAN (Local Area Network) for the AWK-1200-AC. The
AWK-1200-A C’s Local Area Network (LAN) settings are configured based on the IP Address and
Subnet Mask assigned in this section. The IP address is also used to access this web-based
management interface. We recommend using the default settings if you do not have an existing
network.
IP Address Mode
Select
DHCP
to get the IP settings from a DHCP server on your network. Select
Static
to use the
IP settings specified on this page.
IP Address
This is the IP address of the AC on the local area network. Your local area network settings are
based on the address assigned here. For example, 192.168.1.1.
Subnet Mask
This is the subnet mask of your AWK-1200-A C on the local area network.
Default Gateway
This is the IP address of the gateway that connects you to the Iinternet.
WIRELESS
The section is where you configure the wireless settings for your Access Point. Please note that
changes made in this section may also need to be duplicated on your Wireless Client.
To protect your privacy, use the wireless security mode to configure the wireless security features.
This device supports the wireless security modes WEP and WPA Personal. WEP is the original
wireless encryption standard. WPA provides a higher level of security.
Enable Wireless Radio
This option turns off and on the wireless connection feature of the AWK-1200-A C. When you
select this option, the following parameters are d isplayed.
