- 5 -
Wall Mounting (optional)
For some applications, it may be more convenient to mount the
AWK-1127 to a wall, as illustrated below.
STEP 1:
Remove the aluminum
DIN-Rail attachment plate
from the AWK-1127, and
then attach the wall mount
plates with M3 screws, as
shown in the adjacent
diagrams.
STEP 2:
Mounting the AWK-1127 to a wall requires 4 screws.
Use the AWK-1127 device, with wall mount plates
attached, as a guide to mark the correct locations of
the 4 screws. The heads of the screws should be less
than 6.0 mm in diameter, and the shafts should be less
than 3.5 mm in diameter, as shown in the figure at the
right.
Do not screw the screws in all the way—leave a space of about 2 mm to
allow room for sliding the wall mount panel between the wall and the
screws.
NOTE
Test the screw head and shank size by inserting the screw into
one of the keyhole shaped apertures of the Wall Mounting Plates
before it is screwed into the wall.
STEP 3:
Once the screws are fixed into the
wall, insert the four screw heads
through the large opening of the
keyhole-shaped apertures, and
then slide the AWK-1127
downwards, as indicated to the
right. Tighten the four screws for
added stability.
All manuals and user guides at all-guides.com
