manualshive.com logo in svg

Mowox DYM192107, Original Instructions Manual, Page: 21 / 24

Share
Download
Mowox DYM192107 Original Instructions Manual Download Page 21

 21

 

10. BLADE 

The blade is made of hardened steel. It will be necessary to reshape it semiregularly (with a grind wheel). 

Ensure that it is always balanced (an unbalanced blade will cause dangerous vibrations). To check for 

balance, insert a round rod through the central hole and support the blade horizontally. A balance blade will 

remain horizontal. If the blade is not balanced the heavy end will rotate downwards. Reshape the heavy end 

until the blade is currently balanced. To remove the blade (1), unscrew the blade screw (2). 

and replace any parts, which are damaged. 

When reassembling, make sure that the cutting edges face in the direction of the motor rotation. The blade 

screw (2) must be torque to 20N.m. 

WARNING: For service, replace the blade with DAYE blade:   

EM 4662 P-Li(DYM192107): DAYE 2105300083 

EM 4662 S-Li(DYM192207): DAYE 2105300083 

EM 5162 S-Li(DYM192607): DAYE 2105300084 

 

Fig.15 

WARNING: 

Remove the battery from the machine. 

WARNING:

 Protect hands by using heavy gloves or a rag to grasp the cutting blades when replace the 

blade.  

 

11. MAINTENANCE AND CARE 

 

Warning

: 

Before performing any Maintenance or cleaning work, always remove batteries 

and

 pull out the 

isolator key! 

 

Do not spray the unit with water. Ingress of water may destroy the Switch-plug combination unit and the 

electric motor. Clean the unit with a cloth, hand brush, etc.   

Expert inspection is required, do not make any adjustment by yourself, must contact to customer 

Service centre: 

 

a) if the lawn mower strikes an object.   

b) if the motor stops suddenly   

c) if the blade is bent (do not align!)                  

d) if the motor shaft is bent (do not align!) 

e) If the V-belt is defective.   

f) Use only manufacturer’s recommended replacement parts and accessories.   

 

1 

2 

Summary of Contents for DYM192107

























Reviews:

No comments