8
Follow the steps below to install the device:
1) Insert the SIM card into the slot, as shown in the image.
2) Insert the power cable into the "power" connector and plug the power supply into the
power supply port.
3) Connect the phone cord of your phone inside the "Phone" connector (RJ11)
4) Press the "on / off button". The device will start and the LED lights will start blinking. When
the indicator
appears in one of these colors: cyan, blue or green, the device will be
available to make calls. This operation may take a few minutes. If necessary, contact the
technical support of your telephone operator.
Note: This device is compatible with fixed and wireless analog telephones. Telephone is not
supplied in this device.
Only 3FF Simcard standard size is supported.
