Movin' On GPS MOSS-DC2, User Manual

Page: 2 / 10

2 of 10
Function of MOSS-DC2 Dash Cam Button Buttons:
1. Functions of MOSS-DC2 Dash Cam Button in Standby Mode:
 Power Button: Turn on / Turn off the unit. Short press as a shortcut button to switch CH1 Only / CH2
Only / CH1 & CH2
 Left Button: up selection when setting
menu list
 Right Button: down selection when
setting menu list
 Menu Button: Short press to enter the
menu setting, Press again back to the
standby mode
 Mode Button: Short press to enter the
playback model. Press again back to the
standby mode
 OK Button: Confirm the selection in Menu Setting. In Playback Model, short press to play the video,
short press again to stop the Playing. In standby Model, short press to start recording, press again to
stop recording.
2. Functions of MOSS-DC2 Dash Cam Button when The Device Is Recording:
Power Button: short press as a shortcut button to switch CH1 Only / CH2 Only / CH1 & CH2, This can
also be set in the “Record Mode” Selection from Menu Setting List
Left Button: short press to close the audio record, press again to open the audio record
Right Button: Short press to lock the current video files (One Key Preservative Lock), and the video file
will not be overlapped by loop recording function.
Menu Button: Short press to enter the menu setting
Mode Button: Short press to enter the playback model. Press again back to the standby model.
OK Button: Confirm the selection in Menu Setting. In Playback Model, short press to play the video,
short press again to stop the Playing. In standby Model, short press to start recording, press again to
stop recording.