26
not move when the chronograph is running. Pressing
button
A
a second time will stop the chronograph and
move hand
G
to the relevant tenth-of-a-second mark.
Pressing button
B
will reset hands
G
,
E
and
C
to zero.
Adjusting the time does not stop the chronograph, but it
does block buttons
A
and
B
for as long as the crown is
pulled out.
IMPORTANT: Crown must be in position 1 and hands
must be at zero before chronograph is started. Press
button
B
to reset hands to zero. DO NOT push button
A
or
B
while crown is pulled to position 2 or 3. If
button
A
or
B
is accidentally activated while crown is
not flush against case, one or more of the chronograph
hands will become de-synchronized. Should this occur,
follow instructions below.
Synchronization of chronograph hands:
After changing the battery, or in the event of an error,
the chronograph hands can be realigned to zero if
needed. A single push (quick press and release) will
advance hands by one increment. To advance hands
rapidly, depress and hold push buttons for longer than
one second.
Crown position 2:
Adjust minute-counter hand
E
using button
B
.
Crown position 3:
Adjust chronograph seconds hand
C
using button
A
.
Adjust tenths-of-a-second hand
G
using button
B
.
OPERATING THE CHRONOGRAPH
Simple chronograph functions:
1. Press button
A
to start chronograph.
2. Press button
A
a second time to stop chronograph.
3. Press button
B
to reset chronograph to zero.
Accumulated time functions:
1. Press button
A
to start chronograph.
2. Press button
A
a second time to stop chronograph.
3. Press button
A
again to resume measurement.
4. Press button
A
a fourth time to stop chronograph again.
NOTE: Each time you stop chronograph, chronograph
hands will indicate total accumulated time.
5. Repeat steps 1 and 2 to add each additional
interval of time.
6. After you have taken your final accumulated time
reading, press button
B
to reset chronograph hands
to zero.
Split-time or intermediate time functions:
You can take intermediate time readings as a race
progresses with these models:
1. Press button
A
to start chronograph.
2. Press button
B
to momentarily stop chronograph.
3. Read off the intermediate time, for example: 10
minutes, 26 seconds, 3/10 of a second.
4. Press button
B
to resume chronograph function.
Hands will catch up with ongoing event.
5. To read a second split time, press button
B
again.
Repeat steps 2 through 4 to take any additional
split times.
6. Press button
A
to stop chronograph.
7. Take a reading of the final time, for example:
27 minutes, 3 seconds, 7/10 seconds.
8. Press button
B
to reset chronograph hands to zero.
First place and runner-up results:
These chronograph models also allow you to measure
both a winning time and runner-up results:
1. Start chronograph by pressing button
A
.
2. As soon as winner crosses finish line, press button
B
.
Chronograph will stop.
3. When second runner crosses finish line, press
button
A
.
4. Note time for the winner as shown on the dial.
5. Press button
B
; hands will move up to indicate time
for the runner-up.
6. Press button
B
again to return all hands to zero.
12
QUARTZ CHRONOGRAPH
1/10 OF A SECOND – TYPE B
Includes the original Series 800 sport and sport elegant, and select Vizio quartz chronographs
