Movado 1604327, Operating Instructions Warranty & Service Manual

Page: 6 / 102

11 10
Quartz Calendar Models
and Standard Automatic Models
To set the time: (See Figure C)
1. Pull crown gently out to position 3.
2. Turn crown in direction that moves hour/minute
hands counter clockwise to set them to the
desired time.
3. Push crown back in to position 1.
To set the date:
NOTE:
Take AM/PM into account when setting
time, so date changes at midnight, not at noon.
1. Pull crown gently out to position 2.
2. Turn crown clockwise until de sired date appears
in calendar window.
3. Push crown back in to position 1.
To manually wind an automatic
movement: The motion of your arm during
normal daily activities should be sufficient to keep
the movement of your Movado automatic time -
piece wound. However, if you have not worn your
watch for more than 40 hours and the movement
has stopped, you may need to windit manually:
1. With crown in position 1, flush against the
case, turn crown clockwise, completing 20
revolutions.
2. Reset time and date following instructions above.
Figure C
Elliptica
®
One of the unique design features of the Elliptica
timepiece is the 12 o’clock position of the crown,
or winding stem. To avoid bending or breaking
this winding stem, please remove the watch from
your wrist before setting the time.
Position 1 – For normal wear
Position 2 – For time setting
To set the time: (See Figure B)
1. Pull crown out gently to position 2.
2. Turn crown counter clockwise to set hands to
the desired time.
3. Push crown back in to position 1, flush with
the case.
Figure B