Mouser Electronics TMS320C5515 Quick Start Installation Manual Download Page 3

7.     Expand the “User Defined” folder. Right-click on the 

      new configuration that has been created and click  
      “Launch Selected Configuration”. 

 
8.    Click “View->Debug” then click “Target->Connect  
        Target”. CCS will attempt to connect to the C5515  
       EVM and run the GEL file. Once the connection is  
       successful and the GEL file has finished, the console  
       window will print a message stating  
               “Target Connection Complete”. 
 
 

Running the C5515 EVM LED Blink 
Demonstration 

 
1.   The C5515 EVM must be connected in CCS before  
      proceeding. If the board is not connected, please refer  
      to section 4.0 of this guide. 
 
2.   Click “File->Import”. 
 
3.   When the new window appears, expand “CCS” and  
      select “Existing CCS/CCE Eclipse Project”. Click   
      “Next”. 
 
4.   Select “Select Root Directory” and click the “Browse”  

    button. Browse to directory path        
“<Install_Dir>\ccsv4\emulation\boards\evm5515_v1\tests\
led” 
 

      The default <Install_Dir> is “C:\programfiles\Texas   
      Instruments” 
 
5.  Highlight the “LED” folder and click “OK”. Then click  
     “finish” 
 
6.   Click “View->C/C++Projects”. A new tab will appear in  
      the CCS v4 window and there should be a LED project   
      visible. 
 
7.   Click “Project->Build Active Project”. 
 
8.   When the build is complete, a message will print in the  
      Console Window. 
9.   Look in the “C\C++Projects” tab again and expand the  
      “binaries” folder. There now should be a “led.out” file     
      listed. 
 
10. Right click on “led.out” and click “Load Program”. 
 
11. Click “Target->Run”. The C5515 EVM “XF” LED  
      should now blink. 
 
 
 
 

SUPPORT RESOURCES 

 
1.    For additional information regarding the   

TMS320C5515 family of DSPs please refer to the 
following page on the TI web site: 

          

http://tiexpressdsp.com/index.php/C5000

 
2.    Code Composer Studio support is available via a  
       forum at: 

          http://community.ti.com/forums/138.aspx

 

 
3.    More information about other Spectrum Digital  
       emulators can be found at:  

          www.spectrumdigital.com

 

 
 

C5515 EVM Hardware Registration 

 

The C5515 EVM hardware can be registered using the on-
line registration process at www.spectrumdigital.com. 
Spectrum Digital, Inc. warrants the products it produces 
for one (1) year after the date of purchase.  For a product 
to be considered "in warranty", Spectrum Digital must be 
notified of the defect within one (1) year after being 
purchased from Spectrum Digital or one of its authorized 
resellers. Spectrum Digital is not responsible for accidents, 
improper installation of connections, misuse, neglect or 
unauthorized modifications.  If the product qualifies for 
warranty repair Spectrum Digital may repair or replace the 
product at its discretion. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

                                                                                                   512706-4001A                                                                                     Page 3 of 4 

12502 Exchange Dr., Ste 440, Stafford, TX. 77477       T:281.494.4505, F:281.494.5310                                              

www.spectrumdigital.com

 

Summary of Contents for TMS320C5515






Reviews: