USER MANUAL v1.0
Date: 01/20/2014
Page | 13
2.1.3
Interface to external devices
Each i.MX 6Solo processor enables the following interfaces to external devices
(some of them are muxed and not available simultaneously):
•
Displays--Total five interfaces available. Total raw pixel rate of all interfaces is
up to 450 Mpixels/sec, 24 bpp. Up to two interfaces may be active in parallel.
o
One Parallel 24-bit display port, up to 225 Mpixes/sec (for example,
WUXGA at 60 Hz or dual HD1080 and WXGA at 60 Hz)
o
LVDS serial ports
：
One port up to 165 Mpixels/sec or two ports up to
85 MP/sec (for example, WUXGA at 60 Hz) each
o
HDMI 1.4 port
o
MIPI/DSI, two lanes at 1 Gbps
o
EPDC, Color, and monochrome E-INK, up to 1650x2332 resolution and
5-bit grayscale
•
Camera sensors:
o
Two parallel Camera ports (up to 20 bit and up to 240 MHz peak)
o
MIPI CSI-2 serial camera port, supporting from 80 Mbps to 1 Gbps
speed per data lane. The CSI-2 Receiver core can manage one clock
lane and up to two data lanes. Each i.MX 6Solo processor has two
lanes.
•
Expansion cards:
o
Four MMC/SD/SDIO card ports all supporting:
1-bit or 4-bit transfer mode specifications for SD and SDIO
cards up to UHS-I SDR-104 mode (104 MB/s max)
1-bit, 4-bit, or 8-bit transfer mode specifications for MMC cards
up to 52 MHz in both SDR and DDR modes (104 MB/s max)
•
USB
o
One high speed (HS) USB 2.0 OTG (Up to 480 Mbps), with integrated HS
USB PHY
o
Three USB 2.0 (480 Mbps) hosts
One HS host with integrated High Speed PHY
Two HS hosts with integrated HS-IC USB (High Speed Inter-Chip
USB) PHY
•
Expansion PCI Express port (PCIe) v2.0 one lane
o
PCI Express (Gen 2.0) dual mode complex, supporting Root complex
operations and Endpoint operations. Uses x1 PHY configuration.
•
Miscellaneous IPs and interfaces:
o
Three I2S/SSI/AC97,up to 1.4 Mbps each
o
Enhanced Serial Audio Interface ESAI), up to 1.4 Mbps per channel
o
Five UARTs, up to 4.0 Mbps each
Providing RS232 interface
Supporting 9-bit RS485 multidrop mode
