SILICON VALLEY HEADQUARTERS
1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292
FGA V1 ADJUSTABLE
OPERATING INSTRUCTIO
Rev 1.0 (6/15/2022)
How to Indentify a FGA v1 model fro
There are two ways to identify whether you have a v2 or a v1 model.
1. The v2 models has separate battery access cover (see page 2) on the lower side of the
handle. The v1 models does not.
2. Second option is to move the locking bar
knob (CCW direction) below the torque range capacity. Once you pass the letter "L," if it
displays a firmware version, the model is a v2 model.
Power on Display
Press the black lever button to view the digital display and current tool
Sleep Mode
The display stays on for 20 seconds then goes into Sleep mode.
black lever button to awake the tool from Sleep mode
Adjusting
the Torque Setting
Units of Measurement
Press the black lever button while the display is powered o
torque measurement unit options available for
FGA Models
Torque Measurement Units
FGA-8, FGA-20 & FGA-40
ozf.in, lbf.in, cN.m, N.m, kgf.cm
FGA-125
1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
ADJUSTABLE TORQUE SCREWDRIVER
OPERATING INSTRUCTIONS
om FGA v2
There are two ways to identify whether you have a v2 or a v1 model.
The v2 models has separate battery access cover (see page 2) on the lower side of the
Second option is to move the locking bar slide into the unlock position and adjust the
knob (CCW direction) below the torque range capacity. Once you pass the letter "L," if it
displays a firmware version, the model is a v2 model.
igital display and current tool setting.
The display stays on for 20 seconds then goes into Sleep mode. Press the
tool from Sleep mode.
while the display is powered on to toggle through
for your FGA model.
Torque Measurement Units
ozf.in, lbf.in, cN.m, N.m, kgf.cm
lbf.in, N.m, kgf.cm
1
v1 model
v2 model
SCREWDRIVER
