08
STEP 6: Adjust Tension
Note1:
Be sure to keep the arm in horizontal position during adjustment.
Falls down
Rises up
CAUTION
For proper functioning of this mount, depending on different weight of monitor you might need to adjust
tension in
upper arm
(A) using 6 mm allen key (L).
L
A
Checklist
L (x1)
6mm Allen Key
Monitor Weight
Circles
(AT LEAST)
As for how many circles the screw should be turned, refer to below diagram.
Note2:
min
1kg
/2.2lbs
2kg
/4.4lbs
3kg
/6.6lbs
5kg
/11lbs
7kg
/15.4lbs
9kg
/19.8lbs
10kg
/22lbs
3
7
11
15
19
20
If the monitor falls down and fails to stay at the desired
height by itself:
Turn counter-clockwise(“+”direction) to increase gas
spring tension until the monitor can stay at the desired
height by itself.
If the monitor rises up and fails to stay at the desired
height by itself:
Turn clockwise(“-”direction) to reduce gas spring tension
until the monitor can stay at the desired height by itself.