STEP 1: (Continued)
03
OPTION B: Grommet Base Installation
If existing grommet hole comes with a plastic protector, remove it to ensure a flat surface before installing
the desk mount.
Loosen the screw, separate the clamp (C) into two parts.
Install the Base Plate (F) to the Pole(D
）
using 1pc of Bolt (G).
Install the pole (D) on the desktop using the support plate (H) and the bolt separated from clamp(C).
Secure stand to desktop by tightening the plastic knob or by using 6mm Allen key (L).
10-80mm
D
F
H
G
L
OR
DESK
DESK
ø
0.39"~3.1"
C
