(3/8")
H
I
Installation instruction
Concrete wall
Step 1
16"
Step 2
Step 3
16"
Wood stud
Put 4 anchors(I) into drilled holes,
and tap each anchor flush with
the wall by using a hammer.
Then put 4 lag bolts(H) into the
anchors, and tighten each bolt by
using a spanner to mount the
wall plate securely.
Use a stud finder to make marks at
the edges of stud, and mark
centerline of stud. Then place wall
plate along the centerline and use
pencil to mark 2 hole locations on
the wall.
Use 5/32" diameter drill bit to
drill 2 holes at marked positions
to a depth of 2.36".
(5/32")
Use 3/8" diameter drill bit to drill 4
holes at marked positions to a
depth of 2.36".
Level the wall plate and use wall
plate as a template and pencil to
mark 4 hole locations on your
desired height of the wall.
Step 1
Step 2
Step 3
3
Put 2 lag bolts (H) into the drilled
holes, and tighten each bolt by
using a spanner to mount the
plate securely.
TOP
CAUTION
To avoid potential personal injury or property damage:
1. Make sure the head of bolt on the wall plate is upward as the picture shows.
2. The wall must be capable of supporting five times the weight of the TV plus the mount.
3. All anchors/lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate.
Ensure the wall plate is securely fastened to the wall before continuing on to the next step.