To avoid potential personal injury or property damage:
1. Make sure the
BOLT HEAD
on the wall plate is upward as the picture shows.
2.
Solid
concrete wall's thickness should be more than 100mm/4", and the wall must be
capable of supporting five times the weight of the TV plus the mount.
3. All anchors/lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate.
Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
Concrete wall
Option 2
Wall plate installation on concrete wall
①
CAUTION
Make sure the
BOLT HEAD
on the wall plate is upward
put on your desire position,
adjust it make it level .
3/8"
Use 3/8" diameter
drill bit to drill 4 holes
at marked positions
to a depth of 2.5".
Take down the Mounting template, put 4 Concrete Wall
Anchors (not included in the package) into drilled holes,
and tap each anchor flush with the wall by using a
hammer. Then put 4 lag bolts through the washers
into the anchors, and tighten each bolt by using a socket
wrench to mount the wall plate securely. Before totally
tightening the lag bolt please attach the bubble level on
the wall plate to check whether it is level.
④
③
16"
7/32"
④
Place Mounting template along the centerlines,
level it , and use pencil to mark 4 hole locations on
the wall.
Use 7/32" diameter drill bit to drill 4 pilot holes at
marked positions to a depth of 2.5".
⑤
Make sure the
BOLT HEAD
on the wall plate is upward
Take down the Mounting template, put 4 lag bolts through
the washers into the drilled holes, and tighten each bolt
by using a socket wrench to mount the wall plate securely.
Before totally tightening the lag bolt please attach the bubble
level on the wall plate to check whether it is level.
UP
②
③
UP