To avoid potential personal injury or property damage:
1. Make sure the
logo
on the wall plate is upward as the picture shows.
2.
Solid
concrete wall's thickness should be more than 100mm/4", and the wall must be
capable of supporting five times the weight of the TV plus the mount.
3. All anchors/lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate.
Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
Concrete wall
Option 2 Wall plate installation on concrete wall
①
②
③
CAUTION
Make sure the logo on wall plate is upward
UP
3/8"
Use 3/8" diameter drill bit to drill 4 holes
at marked positions to a depth of 2.36".
Level the wall plate and use wall plate as a template and pencil
to mark 4 hole locations on your desired height of the wall.
Put 4 Concrete Wall Anchors (not included in the package)
into drilled holes, and tap each anchor flush with the wall by
using a hammer. Then put 4 lag bolts into the anchors,
and tighten each bolt by using a socket wrench to mount the
wall plate securely.
Before totally tightening the lag bolt please
attach the bubble level on the wall plate to check whether it is
level.
④