22
OPERATION
Switching on and off
Insert the battery (6) into the tool. Press the switch (2). The lamp has two lighting modes (8 or 12 LEDs
lit). To select the mode, press the switch (2) 12 LED – 8 LED ‐ off.
Adjust the angle of the tilting reflector
The tilting reflector (1) lights up horizontally in the basic position, see Picture A.
From the starting position, you can tilt the reflector down, at a maximum angle of 20 ° or upward at
the maximum angle of 90 °.
CARE, MAINTENANCE AND STORAGE
Warning! Risk of injury! Safety and operational reliability can only be guaranteed when
using original spare parts.
The power tool is almost maintenance‐free
• Make sure that no moisture reaches the inside of the power tool during cleaning.
Cleaning
• Before performing any operation remove the battery pack.
• Clean the tool after every use.
• Clean the tool with a wet cloth. Do not use cleaning agents or solutions; these can corrode the
plastic parts of the power tool.
Storage
• Keep the tool in a dry and safe place.
• When storing a lithium‐ion battery for extended periods, check the state of charge regularly. The
optimal “storage” charge level is approximately 50‐80% ‐ three green LEDs on the power indicator.
TECHNICAL DATA
Cordless flashlight PATRIOT ASV18‐1500
Rated voltage
18 V
Working time
34 h
LED light
0,08Wx12
Light settings
2 max. 1500 lm
Lighting angle
110°
Weight without battery
0,24 kgs
Weight with battery
0,84 kgs
Battery charger
Rated voltage
220–240 V, 50‐60 Hz
Charging voltage and current
18 V
3,0 A
Li‐ion battery pack PATRIOT
Nominal voltage
18 V
Capacity
3,0 Ah
Summary of Contents for PATRIOT ASV18-1500
Page 2: ...2...