28
EN
6.3.3 Replacing and repairing the tyres
The tyres are «Tubeless» and so all punctures must be repaired
by a tyre repairer following the procedures required for this
kind of tyre.
6.3.4 Replacing the bulbs (if present)
The bulbs (18W) have a bayonet fitting and are installed in the
bulb holder which can be taken out by turning it anti-clockwise
with pliers.
6.3.5 Replacing a fuse
The machine is fitted with fuses (1) with different capacities
and functions. Specifically:
– 10 A fuse = protects the main and power circuits of the
electronic board. When it blows, the machine stops.
– 25 A fuse = protects the battery charger circuit. When it
blows, the battery gradually runs out and the machine will
have problems starting.
The fuse capacity is indicated on the fuse.
A blown fuse must always be replaced
by one of the same type and ampere rating, and never with
one of another rating.
If problems persist, contact Your Dealer.
IMPORTANT
1
1