Mountfield 1435E Manual Download Page 1

Dear Customer,

Thank you for having chosen one of our products. We hope that you will get complete
satisfaction from using your new machine and that it will fully meet all your expecta-
tions.
This manual has been written to help you become familiar with the machine and use it
safely and efficiently. Do not forget that it is an integral part of the machine, so keep it
close at hand for future reference and pass it on to the purchaser if you sell the
machine.

This new lawn tractor has been designed and built in compliance with current stan-
dards, and is safe and reliable if used for cutting and collecting grass following the
instructions given in this manual (

proper usage

). If you use the machine in any other

way or ignore the instructions for safe use, maintenance and repair, it is considered
"

incorrect usage

". In this case, the warranty is automatically voided and the Manufac-

turer is not held responsible for damage or injury to oneself or others.

Since we regular improve our products, you may find slight differences between your
machine and the descriptions contained in this manual. Modifications can be made to
the machine without notice and without the obligation to update the manual, although
the essential safety and function characteristics will remain unaltered. If in doubt, do
not hesitate to contact your dealer. And now enjoy your work!

AFTER-SALES SERVICE

This manual gives all the necessary instructions for using the machine and carrying out
basic maintenance.

Any adjustments or maintenance operations not described in this manual must
be carried out by your Dealer or a specialized Service Centre. Both have the nec-
essary knowledge and equipment to ensure that the work is done correctly with-
out affecting the safety of the machine.

If you wish, you can ask your dealer to prepare a maintenance programme person-
alised to your needs. This will help you keep your new purchase in peak performance
and maintain its value over time.

INTRODUCTION

1

EN

INTRODUCTION

Summary of Contents for 1435E









































Reviews: