Mountain MTN-12000 User Manual  & Safety Instructions Download Page 2

 

 

WARNING: 

Read all instructions before operating this product. 

Failure to

 

follow all instructions listed below may result in electric 

shock, fire and/or serious injury.

 

 

SAVE THESE INSTRUCTIONS 

 

IMPORTANT SAFETY INSTRUCTIONS                                           

 

Avoid dangerous environments. 

Don’t use appliances in damp or wet locations. 

Don’t use this product in the rain or damp locations. 

 

Keep children away. 

All electrical products are hazardous and can cause injury  

 

Product Storage. 

When not in use, this product should be stored indoors in a dry 

and secure location. Do not let children have access to this product. 

 

Product use. 

Do not use this product for any task except that for which it is 

intended. 

 

Don’t abuse cord. 

Never carry appliance by cord or pull it to disconnect from 

receptacle. Keep cord from heat, oil, and sharp objects. 

 

Disconnect appliances. 

Disconnect the appliance from the power supply when not 

in use, before servicing, and when changing accessories. 

 

Use of accessories and attachments. 

Use the supplied genuine accessories and 

attachments. Except for USB cables, DO NOT use ANY other cords/cables NOT 
provided with this product. 

DANGER:

 The use of any accessory or attachment not recommended for use with 

this appliance could be hazardous. 

 

Use with caution. 

As with any electrical appliance use with caution in an 

uninterrupted manner. 

 

Do not operate this appliance near flammable liquids or in gaseous or 
explosive atmospheres.

 

 

Never submerge this unit or the 120 Volt AC charger in water; 

do not expose 

this unit or the 120 Volt AC Charger to rain, snow or use when wet. 

 

To reduce risk of electric shock, 

disconnect the unit from any power source 

before cleaning. Turning off controls without disconnecting will not reduce this risk. 

WARNING – BURST HAZARD: 

Do not use the unit for charging dry-cell batteries 

that are commonly used with home appliances. These batteries may burst and cause 
injury to persons and damage property.  

WARNING: 

This product can expose you to chemicals including lead and/or di (2-

ethylhexyl) phthalate (DEHP), which is known to the State of California to cause cancer. 
For more information, go to

 

www.P65Warnings.ca.gov

 .

 

 

SPECIFIC SAFETY INSTRUCTIONS FOR CHARGING THIS UNIT 

 IMPORTANT: 

This unit is delivered in a partially charged state. Fully charge the unit 

with the supplied charger for a full 3.5 hours (or until the unit shows as fully charged) 
before using for the first time. 

  To recharge this unit, use only the supplied AC wall charger. Plug in the charging 

adapter at the battery booster first, then plug into the charging source. 

  After charging/recharging, disconnect charging adapter before use. 

  Do not crush, cut, pull or expose charging adapter cords to extreme heat. 

  Position charging adapter cords so they do not become entangled or become a 

safety hazard. Keep charging adapter cords away from sharp edges. 

Summary of Contents for MTN-12000











Reviews: