Mountain Trike MT push, User Manual

Page: 7 / 28

MT push - Owner’s Manual Issue 1
7
Your MT push
Each MT push has its own unique
identification (ID) number. This MT push
ID enables you and the dealer to identify
the MT push and record its history. The
MT push ID can be found stamped into
the frame under the seat.
Please take a moment to write down
your MT push ID and Dealer’s name for
your own records on page 3 in this
manual.
Accompanying this manual you should
also have been supplied with the
following:
•
Brake Instruction manual
•
Shock Instruction manual
1.0 Setting up your MT push
We strongly urge you to read this Manual in its entirety before your first ride. At the very least,
read and make sure that you understand each point in this section, and refer to the cited sections
on any issue which you don’t completely understand. Please note that not every MT push has all
of the features described in this manual and the MT push pictured in the images may differ
slightly to your own MT push.
Ask your dealer to point out the features of your MT push.
1.1 Intended Operator
The MT push is a manual all terrain wheelchair that gives unsurpassed performance on a variety
of challenging types of terrain. The MT push is an attendant wheelchair where the person in the
MT push (rider) is pushed along by someone (pusher) who applies force to the push handle. The
Pusher must accept full responsibility for control of the MT push and must be capable of
controlling the device. If you are unsure as to whether you could use the MT push safely and
effectively, your MT push dealer can assist you and make the appropriate recommendations.