background image

 

 

Mountain Mods – Modular Removable Motherboard Tray – Instructions / Assembly 

 

The Mountain Mod Modular/Removable motherboard tray comes flat packed.  Each individual item is wrapped 
tightly in a special non-adhesive static cling plastic wrap.  The wrap protects the finish from scratching, 
scuffing, fingerprints and movement during transit.  It is important to TAKE CARE when removing the wrap. 
It is recommended to find the edge of the wrap and unroll it or grab a pair of scissors, create a pocket by lifting 
up an area of plastic and cut the wrap.  Make sure if you use sharp instruments to not scratch into the parts. 
It is not recommended to rip the plastic as this may cause bending of parts from the pressure placed upon them. 
 
 

PARTS LIST (items that come with the motherboard tray) 

 
In the diagram on the next page items are listed that are included with the Mountain Mods Modular/Removable 
motherboard tray. 
 

 

A) Motherboard Tray  - 

this is what you mount your motherboard to. 

B) Motherboard Back Panel

 – this is the exterior panel.  It fastens to the rear of the case from the outside. 

C) I/O Panel 

– this is what is known as the I/O (input/output) panel.  I/O ports and PCI devices attach here. 

D) Security flange 

– This attaches to a corner of the motherboard tray to eliminate movement once in place. 

 

NOTE the comments below about the security flange as an option and which cases do not include it. 

E) 10 pack of standoffs/3mm computer screws 

– The standoffs mount to the tray.  The motherboard sits on 

the standoffs with appropriate mounting holes aligned.  Then the 3mm screws tighten into the female end of the 
standoffs and hold the motherboard to the tray. 

F)) 25 pack of 6-32 computer screws 

– These 6-32 computer screws are used for the assembly of back panel to 

I/O Panel and I/O – back panel assembly to the motherboard tray itself.  These are also included to fasten the 
PCI plates into the tray as well as other expansion devices. 

G) 6 x PCI cover plates 

– These are included with the tray to cover any empty PCI slots that are not being 

used. 

Summary of Contents for Modular Removable Motherboard Tray






Reviews: